EUTECH INSTRUMENTS CYBERSCAN PH 300310 PORTABLE METER Manuel d'instructions télécharger pdf (Page 37)

7.6 P5.0: Resetting to factory default settings

Available in pH 300 meter only

In the pH 300 meter, Program 5 lets you reset all

parameters to factory default settings. This clears all

calibration data, memory, and any other setup functions you

might have changed.

From measurement mode

1. Press SETUP key to enter Set Up mode.

2. Press the MI/▲ or MR/▼ keys to scroll through

su/jointfilesconvert/333898/bgroups until you view parameter P5.0.

3. Press the ENTER key to enter parameter P5.0. See

Figure 33.

4. Press the MI/▲ or MR/▼ keys to toggle between NO

and YES.

• NO retains current settings

• YES resets to factory default settings.

5. Press the ENTER key to confirm selection and to

return to the measurement mode. Otherwise press

CAL/MEAS key to return to measurement mode

without resetting to factory default.

Figure 33 - P5.0: Reset to factory

default values (pH 300 meter only)

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Pas de commentaire

EUTECH INSTRUMENTS CYBERSCAN PH 300310 PORTABLE METER Manuel d'instructions Page 37