EUTECH INSTRUMENTS 2700 Manuel d'instructions télécharger pdf (Page 6)

2. Getting Started

Keypad and Display

Auto Read is enabled. When flashing, the instrument has detected a ‘Stable’

reading and locked the value. Press MEAS to resume live reading. See

Section 3—Auto Read

to disable this feature, or go to

SETUP…SYSTEM…AUTO READ.

Based on the stability criteria settings in System Setup, the instrument has

detected a stable reading.

Password Protection: Enabled. Requires password for all

calibration and setup menus

Password Protection: Disabled. No password required for any menu.

Print Setting Timed interval is active; data is

being output at regular intervals.

“High Alarm”, “Low Alarm”, or “Cal Due” alarm limit had been reached.

High/

Low alarms also have an audible notification..

Sample ID: User selectable five digit number to identify samples.

Measuring Range # of displayed value (1 thru 5). Applicable to Conductivity,

TDS, Salinity, or Resistivity measurements only

(ATC)

Automatic Temperature Compensation is active; temperature is being actively

acquired with attached electrode. ATC is recommended.

(MTC)

Manual Temperature Compensation is activ

e. A temperature sensor may not

be attached so the default temperature is used. See Section 9—Temperature

Calibration to calibrate the ATC or MTC temperature values.

1 2 3 4 5 6 7 8 9 10 11 ... 59 60

Pas de commentaire

EUTECH INSTRUMENTS 2700 Manuel d'instructions Page 6