EUTECH INSTRUMENTS DO 6 PLUS Manuel d'instructions télécharger pdf (Page 11)

Instruction Manual COND 6+, TDS 6+, SALT 6+

-6-

1. DO NOT measure or calibrate without the protective

probe guard in place.

2. Immersion above the protective guard is not

recommended. The cable can be submerged briefly

but is not designed for continuous immersion.

See “Probe Care and Maintenance” for more information.

2.7 Connecting the Electrode

1. To connect electrode, align the connector slots with

the posts of meter’s socket and rotate connector

clockwise until it locks.

2. To remove, rotate the connector in anti-clockwise direction until it unlocks, and

slide the connector off the socket.

3. Insert the mini phono jack of temperature sensor into the socket on the meter as

shown below.

BNC connector 2.5 mm mini phono

for temperature

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Pas de commentaire

EUTECH INSTRUMENTS DO 6 PLUS Manuel d'instructions Page 11