EUTECH INSTRUMENTS ALPHA COND 200 - REV 3 Manuel d'instructions télécharger pdf (Page 15)

Operating Instructions αlpha-CON1000

5.2.2.1 Clearing the Advanced Setup security code from the display

After you have entered the security code and returned to the Measurement mode, the security code

“22” still appears on the display whenever you press the ENTER key. To conceal the security code,

you must manually reset the code. To clear the Advanced Setup security code from the display:

1) Press the ENTER key in the Measurement mode.

2) Set to any security code (not 11 or 22) and complete by pressing ENTER.

NOTE: When you enter the Calibration mode with code “11” or Advanced Setup mode with

security code “22”, the unit automatically enters into the HOLD mode until you return back to

Measurement mode. The HOLD annunciator is displayed at the upper left of the display. While on

HOLD, the current output is frozen and set point relays are deactivated.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Pas de commentaire

EUTECH INSTRUMENTS ALPHA COND 200 - REV 3 Manuel d'instructions Page 15