EUTECH INSTRUMENTS ALPHA COND 560 Manuel d'instructions Page 38

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 52
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 37
32
Electrical Data and Connections
Conductivity Input Screw Terminal (3.5mm pitch)
Connection terminal 8-pin, 2-pin & 5-pin terminal blocks, DC
power connector (1.2mm diameter)
EMC Specifications
Emission EN 61 36
Susceptibility EN 61326
Other
Power Input Universal +9 V DC Adaptor and 24V DC
Supply
Dimensions (W x H x D) 96mm x 96mm x 66 mm
Weight (Estimated) 210g
Ambient Temp. operating range 0 to 40
o
C
Maximum Relative Humidity 80% up to 31
o
C decreasing linearly to
50% at 40
o
C
Calibration Default Settings (CAL dEF)
Conductivity
Calibration factor Reset to 1.000
Factory Default Settings (FCt dEF)
Conductivity
Calibration factor Reset to 1.000
Cell constant 1.00
Cell type 2-cell
Measuring range 0 to 2000 µS/cm
Line resistance 0.000
Temperature
Unit of measurement
o
C
Temperature compensation ATC On
Temperature coefficient 2.1% (Both process & calibration temp.
coefficients)
Temperature coefficient type Linear
MTC (ATC Off) 25
o
C (Both process & calibration
temperature)
Controller Output
Controller type Limit control
Relay status De-energized
Relay 1 (SP1)
Set point value 100 µS
Relay function Low
Vue de la page 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

Commentaires sur ces manuels

Pas de commentaire