EUTECH INSTRUMENTS CYBERSCAN DO 5000 DO METER Manuel d'instructions télécharger pdf (Page 35)

Instruction Manual PD 300

8.2 P1.0: Viewing previous pH calibration data

This mode lets you recall previous pH calibration data,

which helps you know when to re-calibrate your meter.

This is a “view only” mode.

From measurement mode:

1. Press the MODE key to select pH measurement

mode if necessary.

2. Press the SETUP key to enter Set up mode.

3. Press the ▲ or ▼ keys to scroll through

su/jointfilesconvert/267593/bgroups until you view parameter P1.0.

4. Press the ENTER key repeatedly to view previous

calibration data. See figure on right.

• P1.1 = pH 1.68

• P1.2 = pH 4.01

• P1.3 = pH 7.00

• P1.4 = pH 10.01

• P1.5 = pH 12.45

5. When you have scrolled through all calibration

data, you will automatically return to the su/jointfilesconvert/267593/bgroup

menu. Press CAL/MEAS key to return to

measurement mode.

NOTE

If there is no previous calibration data at a particular

point, the primary display will show “ ----“.

Figure 21 – P1.0: View calibration

data for pH

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 75 76

Pas de commentaire

EUTECH INSTRUMENTS CYBERSCAN DO 5000 DO METER Manuel d'instructions Page 35