EUTECH INSTRUMENTS CYBERSCAN DO 5000 DO METER Manuel d'instructions télécharger pdf (Page 40)

Instruction Manual PD 300

P3.3 Selecting °C or °F

This meter lets you select between °C and °F units for

temperature readings.

From measurement mode

1. Press the MODE key to select pH measurement

mode.

2. Press SETUP key to enter Set Up mode.

3. Press the ▲ or ▼ keys to scroll through

su/jointfilesconvert/267593/bgroups until you view parameter P3.0.

4. Press the ENTER key three times to select

parameter 3.3.

5. Press the ▲ or ▼ keys to toggle between °C and

°F.

6. Press the ENTER key to confirm selection and to

return to the su/jointfilesconvert/267593/bgroup menu. Press the

CAL/MEAS key to return to measurement mode.

Figure 26 – P3.3: Select

temperature units

See Figure on right.

NOTE

You can switch between °C and °F in Program P5.2 of % saturation mode (or P4.3 in mg/L

mode). If you switch between °C and °F in pH mode, the meter will also switch in % saturation

or mg/L mode.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 75 76

Pas de commentaire

EUTECH INSTRUMENTS CYBERSCAN DO 5000 DO METER Manuel d'instructions Page 40