EUTECH INSTRUMENTS WP PCD 650 Manuel d'instructions télécharger pdf (Page 14)

Instruction Manual PCD 650

1.4 Attaching Safety Belt

The safety belt provides secured support when you hold the meter on your palm.

To attach the safety belt:

1. Use a Phillips screw driver to remove four screws holding the battery cover.

2. Remove the battery cover.

3. Insert the safety belt through the two slots as indicated in the Figure 5.

4. Replace the battery cover onto its original position using the four screws. Note

the ▲UP symbol marked on the cover.

5. Insert your palm in between the belt and the body of the meter and adjust the

hook & loop fastener.

Note the correct side

of the belt

Battery Cover

Hook & Loop

fastener

Figure 5 : Attaching safety belt

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 119 120

Pas de commentaire

EUTECH INSTRUMENTS WP PCD 650 Manuel d'instructions Page 14